68
Using the Configuration Menu Functions
User’s Guide
"Reset" Menu
Sub-menu Function Default
Reset All Resets all items in all menus to their default settings.
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To reset settings such as "Image" or "Signal", select "Reset"
from the respective sub menus.
•The "Computer Input", "Video Signal", "User’s Logo",
"Lamp Hours" and "Language" settings will not be reset to
their defaults. However, if "Background Color" is set to
"Logo" or "Startup Screen" is set to "OFF", these settings
will not be returned to their defaults when "User’s Logo
Protect" is set to "ON".
sp.33
-
Lamp-
Hours
Reset
Initialises the lamp operating time. When this command is
selected, the cumulative lamp operating time is reset to the
initial default value.
-
To Next Page
Loading...
