67
Using the Configuration Menu Functions
User’s Guide
• The "Info" menu shows the setting details for the current
image source.
• The "Lamp Hours" item appears as 0H for 0–10 hours,
and after that, it appears in units of 1 hour.
Computer/RGB Video/Component video
g
Composite video
g
/ S-Video
g
"Info" Menu
Sub-menu Function Default
Lamp
Hours
Displays the cumulative lamp operating time for both
"High Brightness" and "Low Brightness".
•When the lamp warning period is reached, the display
characters appear in red.
0H
Source Displays the input source which is currently being projected.
Input
Signal
Displays the input signal settings.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Resolution Displays the input resolution.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
-
Video
Signal
Shows the video signal format.
(Does not appear when the input source is Computer, RGB
video, Component Video or EasyMP.)
-
Refresh
Rateg
Displays the refresh rate.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
-
Sync.g
Info
Informations in this menu may be required in case that you
ask for service to your dealer or the nearest address provided
at "International Warranty Conditions" section of the
Safety
Instructions/World Wide Warranty Terms
booklet.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
-
To Next Page
Loading...
