Epson EMP-732 - Projecting RGB Video Images

26
Connecting to a Video Source
User’s Guide
Projecting RGB Video Images
Use the accessory computer cable to make the connections.
To RGB output port
Computer cable
(accessory)
To [Computer/Component Video]
port (blue)
TIP
•The input source is determined automatically based on the input
signals.
Some video signals may be reproduced with different colours from
the original images. In such case, set the input source to
"Computer".
s
p.60
•If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected.
s
p.37