70
Using the Configuration Menu Functions
User’s Guide
Select a sub-menu item.
Tilt the [ ] button on the remote control up and down or press
the [ ] and [ ] buttons on the projector's control panel to
move to the sub-item to be set, and then press the [Enter]
button.
The items that are displayed in the "Image" menu, "Signal"
menu and "Info" menu vary depending on the input source that
is being projected.
Change the setting.
(1) Tilt the [ ] button on the remote control or press the [ ]
and [ ] buttons on the projector's control panel to change
the setting.
: Current setting value
: Currently-selected setting item
(2) If you press the [Enter] button when at items with a
displayed, the setting screen for that item will be
displayed.
After making the setting, press the [Enter] button to accept
the setting. The will change to green.
Tilt the [ ] button on the remote control to the left or right or
press the [ ] and [ ] buttons on the projector's control panel to
change the setting.
Press the [Enter] button to accept the setting.
To Next Page
Loading...
