19
EMP-S1 User’s GuideBefore Using the Projector > Connecting to Video Equipment
f For RGB Video
Playing sound from video equipment
f Volume adjustment
Press [a] or [b] on the remote control.
You can also adjust the volume with the configuration menu.
[Menu] button → "Setting" → "Volume" s "Setting menu" P.38
p
• After projection starts, change the "Input Signal" setting in the
"Image" menu to "Computer". s P.35
• For an RGB connection, a commercially available adapter or
converter cable may be required.
Computer cable
(accessory)
To Computer/
Component Video port
To RGB out port
p
When using computer and video equipment alternately, swap the
cable or use an audio switch.
AV cable (red/white)
(commercially available)
To Audio portTo audio out port
To Next Page
Loading...
Need help?
General
