14
Adjusting the Image Quality
B
Adjust the synchronization until the horizontal noise
disappears from the image.
The sync value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
•If you adjust the sync without adjusting the trackingg
first, it will not be possible to get the best adjustment
results. Incorrect tracking adjustment may not be
noticeable with some types of picture. However, pictures
with lots of lines and shading will tend to show
incorrect tracking adjustments more clearly, so check
the tracking adjustment first.
•Flickering and fuzziness may also occur when the
brightness, contrast
g, sharpness, zoom, and keystone
correction settings are adjusted.
Using the remote control
Using the control panel
To Next Page
Loading...
