Epson EMP-S5 User Manual

List of Functions
25
Image Menu (EMP-X5/S5 Only)
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
image signal.
Sub Menu Function
Color Mode You can select the quality of the image to suit your surroundings. s p.14
Brightness You can adjust the image brightness.
Contrastg You can adjust the difference between light and shade in the images.
Color Saturation You can adjust the color saturation for the images.
Tint (Adjustment is only possible when NTSC signals are being input if you use composite video/S-video.)
You can adjust the image tint.
Sharpness You can adjust the image sharpness.
Color Temp. You can adjust the overall tint of the image. When "High" is selected the image becomes tinged with blue, and when "Low" is selected the image
becomes tinged with red.
(This item cannot be selected if "sRGB
g" is selected as the "Color Mode" setting in the "Image" menu.)
Color Adjustment Red, Green, Blue: You can adjust the saturation of each color individually.
(This item cannot be selected if "sRGB
g" is selected as the "Color Mode" setting in the "Image" menu.)
Reset You can reset all adjustment values in the "Image" menu to their default settings. To return all menu items to their default settings, see s p.35
Computer image
Component videog/Composite videog/S-videog

Epson EMP-S5 Specifications

General

Brightness	2000 lumens
Contrast Ratio	400:1
Display Technology	3LCD
Lamp Type	170W UHE
Resolution	800 x 600
Projection Size	30 to 300 inches
Input Ports	S-Video, Composite
Output Ports	D-sub 15 pin (VGA)
Noise Level	35 dB (Normal), 28 dB (Eco)
Lamp Life	3000 hours (Normal mode), 4000 hours (Eco mode)