49
Parent topic: Connecting to an Existing Wi-Fi Network
Related tasks
Scanning to Network Computers from the Network Interface Unit - Windows
Determining the Scanner's IP Address
If you have multiple scanners on your network, you need to know the IP address of the scanner when
setting up network scanning.
1. Do one of the following to start EpsonNet Config:
• Windows 10: Click > EpsonNet > EpsonNet Config.
• Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select
EpsonNet > EpsonNet Config > EpsonNet Config.
• Mac: Open the Applications folder and select Epson Software > EpsonNet > EpsonNet Config
> EpsonNet Config.
2. Locate your scanner in the list and write down the IP address.
Parent topic: Setting Up Network Scanning
Epson DocumentScan App for iOS/Android
You can use the Epson DocumentScan app to scan from a network scanner to an iOS or Android device
over a direct Wi-Fi connection.
For more information about Epson DocumentScan, search for the app on the App Store (iOS) or Google
Play (Android).
Parent topic: Wi-Fi Networking
Using the Network Interface Unit
See these sections to use the optional Epson Network Interface Unit to scan over a network.
Note: You cannot use the Epson Network Interface Unit and flatbed scanner dock options at the same
time. You also cannot use a USB and network connection at the same time.
Network Interface Unit Control Panel
Connecting the Network Interface Unit
Scanning to Network Computers from the Network Interface Unit - Windows
To Next Page
Loading...
