Epson ET-15000 - Scanning; Starting a Scan; Starting a Scan Using the Product Control Panel

143
Scanning
You can scan your originals and save them as digital files.
Starting a Scan
Starting a Scan
After placing your originals on your product for scanning, start scanning using one of these methods.
Starting a Scan Using the Product Control Panel
Changing Default Scan Job Settings
Starting a Scan Using Epson ScanSmart
Starting a Scan Using the Epson Scan 2 Icon
Starting a Scan from a Scanning Program
Starting a Scan from a Smart Device
Scanning a Document in Epson ScanSmart
Selecting Epson ScanSmart Settings
Scanning in Epson Scan 2
Parent topic: Scanning
Starting a Scan Using the Product Control Panel
You can scan an image to a variety of destinations using your product's control panel.
Your product automatically selects default scan settings, but you can view or change them as necessary.
If you are scanning to a computer, you can change the default scan settings using the Event Manager
utility on the computer.
1. Make sure you installed the product software and connected the product to your computer or
network.
Note: Restart your computer after installing the product software to enable scanning from the control
panel. Also make sure the Event Manager program is not being blocked by your firewall or security
software.
2. Place your original on the product for scanning.
3. Press the home button, if necessary.
4. Select Scan.