54
You see a screen like this:
3. Select Wi-Fi Direct.
4. Select Start Setup.
5. Select Start Setup again.
6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen and enter the displayed password.
Note: You can also scan the QR Code on the LCD screen to view online setup instructions.
7. When you are finished, scroll down on the product's LCD screen and select OK.
8. Press the home button to return to the home screen.
The Wi-Fi Direct icon displayed on the LCD screen indicates if Wi-Fi Direct is enabled on the
product. If your device is not connected, repeat step 6 and make sure you enter the password correctly.
If you are printing from a computer, make sure you installed the network software as described on the
Start Here sheet.
Parent topic: Wi-Fi Direct Mode Setup
Modifying the Wi-Fi Direct Network Name or Password
You can modify the Wi-Fi Direct name and password to create a more descriptive and secure Wi-Fi
Direct network.
To Next Page
Loading...
