Epson ET-15000 - Adjusting the Screen Brightness; Turning off the Operation Time out Setting

29
7. Select Yes to restart the printer.
Parent topic: Using the Control Panel
Adjusting the Screen Brightness
You can adjust the brightness of the LCD screen.
1. Press the home button, if necessary.
2. Select Settings.
You see a screen like this:
3. Select General Settings.
4. Select Basic Settings.
5. Select LCD Brightness.
6. Select the – or + icon to decrease or increase the brightness.
7. Select OK to exit.
8. Press the home button to return to the home screen.
Parent topic: Using the Control Panel
Turning Off the Operation Time Out Setting
The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.