145
You can save the scanned file as a JPEG or PDF file, or attach it to an email. You can also set up
custom scan settings using Event Manager and automatically scan using those settings on your product
control panel.
Note: Be sure you have installed Epson ScanSmart, Epson Scan 2, and Event Manager on your
computer before scanning to your computer.
1. Place your original on the product for scanning.
2. Press the home button, if necessary.
3. Select Scan.
You see a screen like this:
4. Select Computer.
Note: Select OK to close the information screen, if necessary.
5. Select one of the following computer connections:
• If your computer is connected to your product using a USB cable, select USB Connection.
Note: Select Select a computer and select USB Connection, if necessary.
• If your computer is connected to your product over a network, select Select a computer and
select your computer from the displayed list. (If the computer is not listed, select Search Again.)
To Next Page
Loading...
