50
• To change the case of letters, select .
• To delete the previous character, select .
• To enter numbers and symbols, select 123#.
• To enter a space, select .
• To finish entering your network name or password, select OK.
7. Select the Enter Password field and use the displayed keyboard to enter your network password.
8. When you are finished, confirm the displayed network settings and select Start Setup to begin
setup.
9. If setup was successful, select Print Check Report to print a network setup report or select OK to
exit.
10. Press the home button to return to the home screen.
The Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the
product is not connected to the network, you may have selected the wrong network name or entered
the password incorrectly. Repeat these steps to try again.
If you are printing from a computer, make sure you installed the network software as described on
the Start Here sheet.
Parent topic: Wi-Fi Infrastructure Mode Setup
To Next Page
Loading...
