Epson ET-2850 Series - Page 148

14.
Close the scanner unit.
Note:
e scanner unit is designed to close slowly and resist a little as a precaution against catching ngers. Continue to close
even if you feel some resistance.
15.
Press the
x button, and then follow the on-screen instructions to set the ink level.
c
Important:
Even if you do not rell ink up to the upper line on the ink tank, you can continue using the printer. To keep
your printer operating at its best, however, ll ink tank up to the upper line and reset the ink level immediately.
Related Information
& “Ink Bottle Codes” on page 191
& “Ink Bottle Handling Precautions” on page 142
& “Cleaning Spilled ink” on page 94
Notes on Resetting the Ink Level
Be sure to reset the ink level aer relling the ink.
If you
relled
two or more colors, you need to select all of the colors that you
relled
and reset the ink level.
Unless you reset the ink level, the ink level displayed does not change even aer relling the ink.
Related Information
& “Checking the Ink Level” on page 85
Solving Problems > It is Time to Rell the Ink > Relling the Ink Tank
148