Epson ET-2850 Series - Loading Paper Types

Loading Paper in the Rear Paper Feeder
1.
Open the feeder guard and pull out the paper support.
2.
Slide the edge guides.
3.
Load paper at the center of the paper support with the printable side facing up.
c
Important:
❏ Do not load more than the maximum number of sheets
specied
for the paper. For plain paper, do not load
above the line just under the
d symbol inside the edge guide.
❏ Load paper short edge rst. However, when you have set the long edge as the width of the user dened size,
load paper long edge rst.
Loading Paper > Loading Paper in the Rear Paper Feeder
25