Epson ET-2850 Series

To Next Page

To Previous Page

Making Wi-Fi Settings by Entering the SSID and Password

You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the

printer's control panel. To set up using this method, you need the SSID and password for a wireless router.

Note:

If you are using an wireless router with its default settings, the SSID and password are on the label. If you do not know the

SSID and password, contact the person who set up the wireless router, or see the documentation provided with the wireless

router.

Select Wi-Fi Setup on the home screen.

To select an item, use the

buttons, and then press the OK button.

Select Wi-Fi (Recommended).

Press the OK button to proceed.

Select Wi-Fi Setup Wizard.

Select the SSID for the wireless router from printer's control panel, and then press the OK button.

Note:

❏ If the SSID you want to connect to is not displayed on the printer's control panel, press the

button to update the

list. If it is still not displayed, select Other SSIDs, and then enter the SSID directly.

❏ If you do not know the SSID, check if it is written on the label of the wireless router. If you are using the wireless

router with its default settings, use the SSID written on the label.

Enter the password.

Select whether or not you print a network connection report aer nishing the settings.

Note:

❏ e password is case-sensitive.

❏ If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If

you are using the wireless router with its default settings, use the SSID on the label. If you cannot nd any

information, see the documentation provided with the wireless router.

When you have setup

nished,

and then press the OK button.

Note:

If you fail to connect, load paper, and then press the

button to print a network connection report.

Related Information

& “Entering Characters” on page 20

& “Checking the Network Connection Status” on page 178

Adding or Replacing the Computer or Devices

Re-setting the Network Connection

Making Wi-

…

172

Epson ET-2850 Series - Page 172