Epson ET-2850 Series - Page 28

3.
Load envelopes short edge
rst
at the center of the paper support with the
ap
facing down.
c
Important:
Do not load more than the maximum number of sheets specied for the envelopes.
4.
Slide the edge guides to the edges of the envelopes.
5.
Tilt the feeder guard until part (A) is not touching the envelopes.
c
Important:
❏ Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
❏ e feeder guard is designed to stop halfway to prevent paper feed problems. Tilt it until it stops.
6.
Select the paper size and paper type.
Loading Paper > Loading Envelopes in the Rear Paper Feeder
28