Epson ET-4500 - Selecting the Date and Time

Note: If you change the country or region, your fax settings return to their defaults and you must select
them again. This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the up or down arrow button, select Setup, and press the OK button.
2. Press the up or down arrow button, select Common Settings, and press the OK button.
You see this screen:
3. Press the up or down arrow button, select Country/Region, and press the OK button.
4. Scroll up or down, if necessary, to select your country or region.
You see a confirmation screen.
5. If the setting is correct, press the up arrow button to select Yes. (If not, press the down arrow button
and retry.)
Note: Changing the country or region restores the fax settings to their defaults.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Selecting the Date and Time
Before faxing, select the current date, time, and daylight saving phase in your area, and choose your
preferred date and time format.
1. Press the up or down arrow button, select Setup, and press the OK button.
2. Press the up or down arrow button, select Common Settings, and press the OK button.
3. Press the up or down arrow button, select Date/Time Settings, and press the OK button.
143