Welcome 13
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-Video signal, you need an S-Video cable. One is
usually provided with your video device, or you can purchase it
from Epson. See page 14.
■ To receive a component video signal from a VCR or other video
device, you’ll need a component video cable and the VGA
component adapter included with your projector.
■ Some older PowerBooks and Macintosh desktop models may
need a Macintosh video adapter; see your computer dealer. Older
iMac systems may need a special adapter to provide a VGA output
port; see your computer dealer.
■ To receive an audio signal, you need a commercially available
audio adapter cable; see your computer or electronics dealer.
■ To use the projector’s remote control to change presentation
slides, you need a USB cable; see your computer or electronics
dealer.
To Next Page
Loading...
Need help?
General
