Setting Up the Projector 23
Playing Sound Through the Projector
You can connect a commercially available computer audio adapter
cable to take advantage of the projector’s built-in speaker. You can
obtain an audio adapter cable (3.5-mm stereo miniplug to two male
RCA plugs) from a computer or electronics dealer.
1. Connect the RCA plugs on the audio adapter cable to the
corresponding
L-Audio-R jacks on the projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or audio-out jack, or your desktop’s
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
Connect audio
adapter RCA plugs
To Next Page
Loading...
Need help?
General
