54 Fine-tuning the Projector
4. After highlighting the option you want to adjust, use the
Vol– or
Vol+ button on the remote control or left or right arrow buttons
on the projector to change the setting. In some cases, you may
have to press the
Enter button to see a sub-screen for changing
the setting.
■ Press the Vol– or Vol+ button on the remote control or the
left or right arrow buttons on the projector to adjust a slider
bar.
■ To select from two or more settings, use the Vol– or Vol+
buttons or arrow buttons to highlight the desired setting,
then press
Enter.
5. Press the
Esc button to return to the previous menu or to close
the menu system if you are at the main menu. Your changes are
saved automatically.
6. Press the
Menu button to exit the menu system.
To Next Page
Loading...
Need help?
General
