Items required:
❏ Cotton swabs (several)
❏ Water with a few drops of detergent (2 to 3 drops of detergent in 1/4 cup of tap water)
❏ Light for checking smears
c
Important:
Do not use cleaning liquid other than water with a few drops of detergent.
1.
Turn o the printer by pressing the
P
button.
2.
Open the scanner unit.
3.
Check if the translucent lm is smeared. Smears are easier to see if you use a light.
If there are smears (such as nger marks or grease) on the translucent lm (A), go to the next step.
Maintaining the Printer
>
Cleaning the Translucent Film
117
To Next Page
Loading...
