❏ Power O If Disconnected
Select this setting to turn the printer o aer 30 minutes when all ports including the USB port are
disconnected. is feature may not be available depending on your region.
Language:
Select the language used on the LCD screen.
Keyboard
Change the layout of the keyboard on the LCD screen.
Sleep Timer:
Adjust the time period to enter a sleep mode (energy saving mode) when the printer has not
performed any operations. e LCD screen turns black when the setting time passes.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing.
e
printer prints the
other side aer printing one side. If your printout is smeared, increase the time setting.
Related Information
& “Saving Power - Control Panel” on page 119
& “Entering Characters” on page 17
Menu Options for Network Settings
Select the menus on the control panel as described below.
Settings > Network Settings
Print Status Sheet:
Prints a network status sheet.
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
❏ Wi-Fi (Recommended)
❏ Wi-Fi Direct
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the check report to solve the problem.
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 31
& “Making Wi-Fi Settings by Push Button Setup” on page 32
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 33
Menu Options for Settings
>
Menu Options for Network Settings
122
To Next Page
Loading...
