Select the connection type and then click Next.
Follow the on-screen instructions.
Connecting to a Smart Device
Connecting to a smart device over a wireless router
You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.
http://epson.sn > Setup
Note:
If you want to connect a computer and a smart device to the printer at the same time, we recommend setting up from the
computer rst by using the installer.
Related Information
& “Printing from Smart Devices” on page 87
Connecting to an iPhone, iPad, or iPod touch using Wi-Fi Direct
is
method allows you to connect the printer directly to an iPhone, iPad, or iPod touch without a wireless router.
e following conditions are required to connect using this method. If your environment does not match these
Network Settings
>
Connecting to a Smart Device
>
Connecting to an iPhone, iPad, or iPod touch using Wi-Fi Direct
25
To Next Page
Loading...
