Epson Expression Home XP-4150 Series

Scanning
Scanning Using the Control Panel
Scanning to a Computer
c
Important:
Before scanning, install Epson Scan 2 and Epson Event Manager on your computer.
Note:
You cannot save multiple originals as one PDF le when scanning from the control panel. By using Epson Scan 2 and setting
Add or edit pages aer scanning on the Document Mode, you can scan additional originals aer you scanned the original,
and then save as one le.
1.
Place the originals.
2.
Select Scan on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
3.
Select Computer.
4.
Select the computer to which you want to save the scanned images.
❏ If the Select Computer screen is displayed, select the computer from the screen.
❏ If the Scan to Computer screen is displayed and the computer is already selected, make sure the selected
computer is correct. If not, select
to reselect the computer.
Note:
❏ When the printer is connected to a network, you can select the computer to which you want to save the scanned
image. You can display up to 20 computers on the printer's control panel. If you set Network Scan Name
(Alphanumeric) on Epson Event Manager, it is displayed on the control panel.
Scanning > Scanning Using the Control Panel > Scanning to a Computer
96