Copying
Copying Basics
is section explains the steps for copying from the Copy menu on the control panel.
1. Load paper in the printer.
2. Place the originals.
3. Select Copy on the home screen.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
4.
Make the settings on the Copy tab.
❏ B&W/Color: Select color copy or monochrome copy.
❏
(2-Sided Copying): When making 2-sided copies, select the item, select 1→2-Sided, and then make
settings for Original Orientation and Binding Margin. Select OK to conrm.
❏
(Density): Select the item to make settings for copy density. Press the + button to increase the density,
and press the - button to decrease the density. Select OK to conrm.
5. Select the Advanced Settings tab, and then change the settings as necessary.
6. Select the Copy tab, and then set the number of copies.
7. Press the
x
button.
Note:
e color, size, and border of the copied image are slightly dierent from the original.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 52
& “Loading Paper in the Paper Cassette 2” on page 55
& “Placing Originals on the Scanner Glass” on page 61
User's Guide
Copying
114
To Next Page
Loading...
