Related Information
& “Scanning Using Epson Scan 2” on page 132
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Operation Sounds Are Loud
If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
❏ Control panel
Select
on the home screen, and then enable Quiet Mode.
❏ Windows printer driver
Enable Quiet Mode on the Main tab.
❏ Mac OS printer driver
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.
❏ Epson Scan 2
Click the
button to open the Conguration window. Next, set the Quiet Mode on the Scan tab.
Related Information
& “Guide to Windows Printer Driver” on page 175
& “Guide to Mac OS Printer Driver” on page 178
Cannot Save Data to a Memory Device
❏ Use a memory device that is supported by the printer.
❏ Check that the memory device is not write protected.
❏ Check that the memory device has enough available memory. If the available memory is low, data cannot be
saved.
Related Information
& “Supported External Storage Device Specications” on page 225
User's Guide
Solving Problems
219
To Next Page
Loading...
