❏ Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the tray is
ejected.
Related Information
& “Printing Photos onto a CD/DVD Label” on page 80
& “Copying on a CD/DVD Label” on page 117
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Power Does Not Turn O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
Power Turns O Automatically
❏ Select Settings > Basic Settings > Power O Settings, and then disable the Power O If Inactive and Power
O If Disconnected settings.
❏ Select Settings > Basic Settings, and then disable the Power O Timer Setting.
Note:
Your product may have the Power
O
Settings or Power
O
Ti me r feature depending on the location of purchase.
LCD Screen Gets Dark
e printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.
The Auto Power On Features does not Work
❏ Make sure that the Auto Power On setting in Basic Settings has been enabled.
❏ Make sure that the printer is properly connected with a USB cable or to a network.
Related Information
& “Basic Settings” on page 165
User's Guide
Solving Problems
195
To Next Page
Loading...
