Related Information
& “Making Wi-Fi Settings Manually” on page 29
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 30
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 32
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 33
& “Making Advanced Network Settings” on page 34
Making Wi-Fi Settings Manually
You can manually set up the information necessary to connect to an access point from the printer's control panel.
To set up manually, you need the SSID and password for an access point.
Note:
If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.
1. Select on the home screen.
To select an item, move the focus to the item using the
u
d
l
r
buttons, and then press the OK button.
2. Select Wi-Fi (Recommended).
3.
Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
4. Select Wi-Fi Setup Wizard.
User's Guide
Network Settings
29
To Next Page
Loading...
