Epson Expression Premium XP-6001 - Making Advanced Network Settings

4. Press the OK button to start making settings.
5. Check the SSID and password displayed on the printer's control panel.
On the computer's network connection screen or the smart device's Wi-Fi screen, select the SSID shown on the
printer's control panel to connect.
Note:
You can check the connection method on the Web site. To access the Web site, scan the QR code displayed on the
printer's control panel using the smart device or enter the URL (http://epson.sn) on the computer, and then go to Setup.
6.
Enter the password displayed on the printer's control panel on the computer or smart device.
7.
Aer
the connection is established, select OK on the printer's control panel.
8.
Press the
button.
Related Information
& “Checking the Network Connection Status” on page 35
& “When You Cannot Make Network Settings” on page 200
Making Advanced Network Settings
You can change the network device name, TCP/IP setup, proxy server and so on. Check your network environment
before making changes.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
2. Select Network Settings > Advanced.
3. Select the menu item for settings, and then select or specify the setting values.
4. Select Start Setup.
Related Information
& “Setting Items for Advanced Network Settings” on page 34
Setting Items for Advanced Network Settings
Select the menu item for settings, and then select or specify the setting values.
❏ Device Name
You can enter the following characters.
❏ Character limits: 2 to 15 (you must enter at least 2 characters)
❏ Usable characters: A to Z, a to z, 0 to 9, -.
❏ Characters you cannot use at the top: 0 to 9, -.
❏ Characters you cannot use at the bottom: -
User's Guide
Network Settings
34