❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Do not load more than the maximum number of sheets specied for the paper.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
❏ Clean the roller inside the printer.
Related Information
& “Environmental
Specications
” on page 227
& “Paper Handling Precautions” on page 48
& “Available Paper and Capacities” on page 49
&
“List of Paper Types” on page 50
& “Cleaning the Paper Path for Paper Feeding Problems” on page 159
Paper Jams
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
Related Information
& “Removing Jammed Paper” on page 190
& “Loading Paper in the Paper Cassette 1” on page 52
& “Loading Paper in the Paper Cassette 2” on page 55
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 52
& “Loading Paper in the Paper Cassette 2” on page 55
Several Sheets of Paper are Fed at a Time
❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
CD/DVD Tray is Ejected
❏ Make sure the disc is properly set on the tray and reinsert the tray correctly.
User's Guide
Solving Problems
194