c
Important:
To prevent paper jams, avoid the following
documents. For these types, use the scanner glass.
❏ Documents held together with paper clips,
staples, etc.
❏ Documents that have tape or paper stuck to
them.
❏ Photos, OHPs, or thermal transfer paper.
❏ Paper that is torn, wrinkled, or has holes.
A
Tap the originals on a flat surface to even the
edges.
B
Open the ADF input tray, and then slide out the
output tray extension.
C
Slide the edge guide on the Automatic Document
Feeder.
D
Insert the originals face-up and short edge first
into the Automatic Document Feeder, and then
slide the edge guide until it is flush with the
originals.
Note:
The ADF icon is displayed when originals are placed in
the automatic document feeder.
Note:
❏ For A4, 2-up Copy layout, place the original as
shown. Make sure the orientation of the original
matches the Document Orientation settings.
❏ When you use the copy function with the Automatic
Document Feeder (ADF), the print settings are fixed
at Reduce/Enlarge - Actual Size, Paper Type - Plain
Paper, and Paper Size - A4. The print is cropped if
you copy an original larger than A4.
Basic Guide
Paper and Media Handling
10
To Next Page
Loading...
