Epson FX-2180 Manual

EPSON FX-2180
11/98 EPSON FX-2180
- 3
Electrical
Note:
Check the label on the back of the printer for your printer’s voltage.
Environmental
Paper
Note:
Use recycled paper and envelopes only under normal temperature
and humidity conditions, as follows:
Temperature 59° to 77° F (15° to 25° C)
Humidity 30% to 60% RH
Do not load paper that is curled or has been folded.
Continuous paper (ordinary and multi-part):
Continuous labels (front and bottom entry only):
Note:
Use only labels mounted on continuous backing sheets.
Single sheets:
Ribbon: Black ribbon cartridge (S015086)
Ribbon life of approximately 12 million
characters (draft 10 cpi, 14 dots/character)
120 V Model 220 to 240 V Model
Input voltage range 99 to 132 V 198 to 264 V
Rated frequency range 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Rated current 1.0 A (maximum
1.8 A)
0.5 A (maximum
0.9 A)
Power consumption Approx. 46 W (ISO/IEC 10561 letter pattern)
Temperature
Humidity (Without
Condensation)
Operation 41
°
to 95
°
F (5
°
to 35
°
C) 10% to 80% RH
Storage –22
°
to 140
°
F (–30
°
to 60
°
C) 0% to 85% RH
Minimum Maximum
Width (inches)
(mm)
4
101.6
16
406.4
Length (inches)
(one page) (mm)
4
101.6
22
559
Copies 1 original + 5 copies
1 original + 6 copies (front or bottom
entry with the pull tractor only)
Thickness (inches)
(printable area) (mm)
0.0025
0.065
0.018
0.46
Thickness (inches)
(perforated edges) (mm)
—
—
0.035
0.9
Weight (lb)
(ordinary page) (g/m
2
)
14
52.3
22
82
Weight (one sheet (lb)
of multi-part) (g/m
2
)
12
40
15
58
Binding Point glue or paper staples on both sides
(front, bottom, or rear entry) or point glue
on only one side (rear entry)
Minimum Maximum
Label size See figure below
Backing sheet (inches)
width (mm)
4
101.6
16
406.4
Backing sheet (inches)
length (mm)
4
101.6
22
559
Backing sheet (inches)
thickness (mm)
0.0028
0.07
0.0035
0.09
Total (inches)
thickness (mm)
0.0063
0.16
0.0075
0.19
Label weight (lb)
(g/m
2
)
17
68
Minimum Maximum
Width (inches)
(mm)
3.9
100
16.5
420
Length
(inches)
(mm)
Front Top
entry: entry:
5.8
3.9
148
100
16.5
420
Thickness (inches)
(mm)
0.0025
0.065
0.0055
0.14
Weight (lb)
(g/m
2
)
14
52.3
24
90
Quality Plain paper, bond paper, and recycled
paper
2.5 inches (63.5 mm) min.
corner radius = 0.1 inch (2.5 mm) min.
15/16 inch
(23.8 mm) min.

Epson FX-2180 Specifications

General

Brand	Epson
Model	FX-2180
Category	Printer
Language	English