14 Setting up the Scanner
L
R4CA100
Setup Guide Rev. D
SETUP.FM A5 size
12/9/03
Proof Sign-off:
KOW M. Tago K. Yoda
T. Takahashi
NOC K. Lee
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices
to communicate properly with each other. You may need to
change the terminator switch setting according to your computer
system.
Note:
Do not use an external terminator.
When you connect the scanner to the end of the daisy chain, turn
the terminator switch to On; in other cases, turn the switch to Off.
The terminator
switch
To Next Page
Loading...
