EasyManuals Logo

Epson Home Cinema 5050UB User Manual

Epson Home Cinema 5050UB
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
139
Resetting the Lamp Timer
Parent topic: Projector Maintenance
Related references
Optional Equipment and Replacement Parts
Projector Information Display - Info Menu
Projector Lamp Specifications
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful
removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side
of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you
open the lamp cover.

Table of Contents

Other manuals for Epson Home Cinema 5050UB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Home Cinema 5050UB and is the answer not in the manual?

Epson Home Cinema 5050UB Specifications

General IconGeneral
Matrix size0.74 \
Matrix type3-panel (p-Si TFT active)
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance1.48 - 18.99 m
Projection technology3LCD
Supported aspect ratios4:3, 16:10, 16:9
Contrast ratio (typical)1000000:1
Screen size compatibility50 - 300 \
Projector native resolutionDCI 4K (4096x2160)
Lamp typeUHE
Lamp power250 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
FocusAuto
Focal length range22.5 - 46.7 mm
Aperture range (F-F)2 - 3
Full HDYes
Video color modesCinema, Dynamic, Natural
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format system-
DVI portNo
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Noise level31 dB
PlacementCeiling
Product typeCeiling-mounted projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Power sourceAC
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)373 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals