96
Saving the Lens Position and Using Saved Lens Positions
You can save the focus, zoom, and lens shift settings and then select the saved settings whenever you
want to use them.
1. Turn on the projector and display an image.
2. Adjust the focus, zoom, and lens shift settings.
3. Press the Menu button.
Note: You can also press the Memory button on the remote control to access the Memory menu
directly.
4. Select the Settings menu and press Enter.
5. Select the Memory setting and press Enter.
You see this screen:
6. Select one of the following options:
• Load Lens Position: Overwrites your current focus, zoom, and lens shift settings with saved
settings
Note: You can load the saved settings from Memory1 or Memory2 by pressing the Lens1 or
Lens2 buttons on the remote control.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
