Your HX-20 is now ready for use.
Selecting
a
different
character
set
Please note: The following information is for dealer reference only!
The circuit cover should be removed only by an authorized Epson
dealer or service center. Removing it yourself will void your war-
ranty. You may select special character sets by using HX-20 soft-
ware; see The HX-20 BASIC Tutorial and Reference Manual.
The HX-20 can display and print special characters required by
users in a number of different countries. (See Table 3-1.)
TABLE
3-1
International
Character
Sets
To use any non-USA character set, touch a grounded surface such
as a cold water pipe and then remove the circuitry cover on the
bottom of the HX-20.
27
To Next Page
Loading...
