Epson L6490 Series User Manual

Paper is Ejected During Printing
Letterhead is not selected as the paper type.
Solutions
When you load letterhead paper (paper on which information such as the sender's name or corporation
name are pre-printed in the header), select Letterhead as the paper type setting.
Original Does Not Feed in the ADF
e
following causes can be considered.
Originals that are not supported by the ADF are being used.
Solutions
Use originals supported by the ADF.
& “ADF Specications” on page 266
The originals are loaded incorrectly.
Solutions
Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
Too many originals are loaded in the ADF.
Solutions
Do not load originals above the line indicated by the triangle symbol on the ADF.
The original slips when paper dust adheres to the roller.
Solutions
Clean the inside of the ADF.
& “Cleaning the ADF” on page 115
Originals are not detected.
Solutions
On the screen for copy or scan, or fax, check that the ADF icon is on. If it is o, place the originals again.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly
138

Epson L6490 Series Specifications

General

Print Technology	PrecisionCore Print Head
Print Resolution	4800 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Scan Resolution	1200 x 2400 dpi
Copying	Yes
Fax	Yes
Paper Handling Input	250 sheets
Dimensions	375 x 347 x 231 mm
Duplex Printing	Automatic
Scanner Type	Flatbed & ADF
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Paper Sizes	A4, A5, A6, B5, Letter
Display	2.4" Colour LCD Touch Panel