Epson L6490 Series User Manual

Do not press with too much force on the original or the document cover.
& “Placing Originals” on page 35
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Basic Menu Options for Copying” on page 72
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
dierent angle.
& “Advanced Menu Options for Copying” on page 73
An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals” on page 35
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Basic Menu Options for Copying” on page 72
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
209

Epson L6490 Series Specifications

General

Print Technology	PrecisionCore Print Head
Print Resolution	4800 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Scan Resolution	1200 x 2400 dpi
Copying	Yes
Fax	Yes
Paper Handling Input	250 sheets
Dimensions	375 x 347 x 231 mm
Duplex Printing	Automatic
Scanner Type	Flatbed & ADF
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Paper Sizes	A4, A5, A6, B5, Letter
Display	2.4" Colour LCD Touch Panel