Epson L8160 - Enabling Wi-Fi Direct Mode (Simple AP)

44
Parent topic: Wi-Fi or Wired Networking
Enabling Wi-Fi Direct Mode (Simple AP)
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer,
mobile devices, or other devices (up to 8) without a wireless router or access point.
Note: Make sure the Epson Smart Panel app or another compatible Epson printing app is installed on
your mobile device before connecting to the product.
1. Select the home icon, if necessary.
2. Select Smartphone connect.
• If your product is not connected to a wireless network, select Start Setup. The product information
is displayed on the LCD screen. Open the compatible Epson printing app on your device and
select your product. Select Complete on the LCD screen.
• If your product is already connected to a wireless network, select Other Methods and go to the
next step.
3. Select Start Setup.
4. Select Other Methods.
You see this screen: