1
Setting Up the Printer
1-13
R4C4590
Rev. D
A5 size SETUP.FM
3/30/01 Pass 1
R
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley, Courtier _______
Installing the printer software in Windows 98, 95,
2000, or NT 4.0
Follow the steps below to install the printer software in
Windows 98, 95, 2000, or NT 4.0:
Note:
❏ Installing the printer software for Windows 2000 or NT 4.0 may
require administrator privileges. If you have problems, ask your
administrator for more information.
❏ If you wish to make a diskette version of the printer software on your
CD-ROM, insert the CD and run the EPSETUP program. In the
dialog box that appears, click the Driver disk creation utility
button and follow the on-screen instructions.
❏ If you are using the diskette version of the EPSON software, make
a backup copy of the EPSON printer software disk or disks before
you begin installation.
❏ If the New Hardware Found screen or any other wizard appears
when you turn on your computer, click Cancel and follow the steps
below.
❏ If the Digital Signature Not Found screen appears, click Yes. If you
click No, you must reinstall the printer driver as described below.
❏ Installation time varies depending on your computer.
1. Make sure Windows 98, 95, 2000, or NT 4.0 is running and the
printer is off.
2. Insert the printer software CD-ROM in the CD-ROM drive.
The Install dialog box appears. (If you are using diskettes,
insert the diskette in a disk drive, then double-click the Drive
icon and double-click the Setup.exe icon.)
To Next Page
Loading...
