2
Paper Handling
2-15
R4C4590
Rev. D
A5 size HANDLE.FM
3/30/01 Pass 1
R
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley, Courtier _______
If the perforation between pages is not aligned with the tear-off
edge, you can adjust the tear-off position using the micro-adjust
feature as described later in this chapter.
c
Caution:
Never use the tear-off function to feed labels backwards; they may
come off their backing and jam the printer.
Using the Tear Off button
You can use the Tear Off button (the Tear Off/Bin button on the
LQ-680 or the Tear Off/Special Paper button on the LQ-680Pro)
to advance continuous paper to the tear-off position by following
the steps below:
1. Make sure printing has finished. Then press the Tear Off
button until the two lights on the control panel start flashing.
The printer advances the paper to the tear-off edge.
tear-off edge
To Next Page
Loading...
