When you access EPSON Status Monitor 3 as described above, the following printer status window
appears.
You can view printer status information in this window.
Note:
It might not be possible to retrieve the printer status during printing. In this situation, click the EPSON
Status Monitor 3 button in the Utility tab, and use the printer with the status window left open.
Using Bi-D Adjustment
This utility tool allows you to make adjustment when you find a misalignment in vertical line.
Making adjustment with Bi-D Adjustment
To make Bi-D Adjustment, follow the steps below.
!
Caution:
❏ Do not turn off the printer while the printer is printing adjustment pattern. Doing so may
cause the printer to store incorrect settings. If you turned off the printer during the
adjustment process, restart Bi-D Adjustment again.
❏ Serial connection is not supported.
❏ Make sure that the printer’s status is ready before making Bi-D Adjustment.
❏ If Bi-D Adjustment is not printed properly, set the printer’s font setting to default and try
again.
LQ-780/LQ-780N User’s Guide
Printer Software 59
To Next Page
Loading...
