Epson LW-PX900 - Troubleshoot Update Errors

6
Troubleshoot Update Errors
Error Messages
Troubleshooting
Check if the printer is in the “Waiting for update” mode.
>> Put the LW-PX900 into “Waiting for update” mode
Check if the printer driver for USB connection has been
installed on the computer.
>> Install the printer driver for USB connection
Check if the USB cable is firmly connected to the printer and
the computer. Then retry the update.
>> Update the firmware
LW-PX900 is not connected. Put your LW-PX900 into “Waiting
for update” mode, and then connect it to the computer.