Confidential
REVISION SHEET
Sheet 2 of 2
REV. SHEET CHANGED CONTENTS
A Enactment
All All pages are changed due to add “Confidential” in the header.
I
“Confidentiality Agreement” [added]
1 Timing sensor circuit configuration (printer side) [changed]
B
Diagram numbering [changed]
All Rev.B Æ Rev.C
3 1.3 Major Electronic Components and Manufacturer’s names are revised.
6 2.4 Paper Exit Design is added, and all the following item numbers are changed.
2.5 Paper Cutter Design: content of 1) is revised, and 4) is added.
C
7 2.8 Other Notes on Designing the Outer Case: 4) and 5) are added.
TITLE
M-192G
Designer’s Guide
(STANDARD)