Light status Condition/solution
On The scanner is turned on and ready to scan.
Flashing (1 second intervals) The scanner is scanning or initializing. Wait for the status light to stop
flashing before turning off the scanner.
Flashing rapidly (0.5 second An error has occurred. Try the following:
intervals)
• Check the scanner connection to your computer to make sure it is
secure.
• Make sure your scanning software is installed correctly.
• If the status light is still flashing, turn off the scanner, then turn it on
again. If the error continues, the scanner may be malfunctioning.
Contact Epson for support.
Off The scanner is turned off.
Parent topic: Solving Problems
Solving Scanning Problems
Check these solutions if you have problems scanning with your product.
Scanner Does Not Turn On or Turns Off Unexpectedly
Scanner Buttons Do Not Work as Expected
Scanning Software Does Not Operate Correctly
Cannot Start Epson Scan
Scanning is Slow
Cannot Scan Using Thumbnail Preview
Parent topic: Solving Problems
Scanner Does Not Turn On or Turns Off Unexpectedly
If the scanner does not turn on or if it turns off unexpectedly, try these solutions:
• Make sure the USB cable is securely connected to the computer.
• Connect the scanner directly to the computer. The scanner may not work properly when connected
through a USB hub.
• Use the USB cable that came with the scanner.
• Wait a few seconds for the scanner to turn on and the status light to stop blinking.
95
To Next Page
Loading...
Need help?
General
Weight and Dimensions
