59
6 Repeat step 5 until you have entered a 4-digit
number to use as your Bluetooth Passkey. Then
press OK.
7 At the confirmation screen, press OK again.
The passkey will be required if your Bluetooth
Communication Mode is set to Pairing, or if Encryption
is enabled. For more information about Bluetooth
settings, see your on-screen User’s Guide.
Returning to Default Settings
You can return all settings to the PictureMate original
default settings.
1 Press Menu.
2 Press u or d to highlight Setup, then press OK.
3 Press u or d to highlight Reset Default Settings,
then press OK. You see this message:
4 Press OK to restore the original settings, or press
Back to go back to the menu without restoring
the settings.
After you restore the default settings, you see a
confirmation message.
5 Press OK to confirm.
To Next Page
Loading...
