57
2. Press or to highlight Maintenance, then press OK.
3. Press or to highlight
LCD Contrast, then press OK.
4. When you see this message, press OK to continue.
5. Press or to adjust the contrast, then press OK.
Printing From a PictBridge-enabled Digital
Camera
You can connect your PictBridge-enabled digital camera to the back of PictureMate
and use the camera to control printing. (See your camera’s documentation to see if it
supports the PictBridge standard.)
1. Make sure there are no memory cards in PictureMate’s memory card slots. The
card light should be off.
Note: If a memory card is inserted, the printer will read photos from the card, not
from a camera.
To Next Page
Loading...
