3. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the
printer.
4. Make sure that the print head is not hot. Then remove the ribbon cartridge as described in
“Replacing the ribbon cartridge” on page 39.
5. Make sure that the printer cover is closed.
6. Repack the printer, ribbon cartridge, and power cord (if necessary) in their original packing
materials and place them in the printer’s original box.
PLQ-50/PLQ-50CS/PLQ-50M/PLQ-50CSM/PLQ-50CSK User’s Guide
Maintenance 48
To Next Page
Loading...
