1 Power light
2 Lamp light
3 Temperature light
Power light Lamp light Temperature Status and solution
light
Green Off Off Normal operation.
Flashing green Off Off Warming up. Wait for an image to appear.
Orange Off Off Standby or sleep mode.
Flashing orange Off Off Preparing network monitoring or shutting down.
(Wait for the light to remain orange before
unplugging the projector.)
Flashing red Off Flashing orange Projector is too hot.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• Make sure the environmental temperature is not
too hot.
• If overheating continues, replace the air filter.
Red Off Red Projector has overheated and turned off. Leave it
turned off to cool down for five minutes.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• If operating the projector at high altitude, turn on
High Altitude Mode.
• If overheating continues, replace the air filter.
• If the problem persists, unplug the projector and
contact Epson for help.
140
To Next Page
Loading...
